How to Build a Square Fire Pit
Share +
There is not a lot of work, but it involves a bunch of blocks of
stones, so make sure you work out properly before you attempt this. According to where you decide to place it (directly on the ground or on the pavement), you will need:
• (optional) a shovel;
• a whole lot of stone blocks;
• a set of wall caps;
• decorative rocks;
• a fire ring;
• wood;
• a whole lot of stone blocks;
• a set of wall caps;
• decorative rocks;
• a fire ring;
• wood;
Start by marking out the location and
size of your square. Then, starting at the corner, place the corner
block. Next, you will have to cut a block at the three quarter length
and put the cut-end against the corner block in order to create the
actual corner of the pit. Use a square to align the blocks and make
adjustments if necessary. Build out from the corner you just made in
both directions, placing the blocks in the desired pattern. At the next
corner, use the small block which you cut earlier to make the corner.
Start the second layer in the same way, but alternating the colors of
the blocks used. You could create your own custom pattern, if you wish.
Finish the whole structure with wall caps. Place the first wall cap so
it overhangs slightly with the long and short ends facing outside of the
corner.
Place the other caps in an alternating
pattern. Due to the shape of the caps, you will end up with some gaps on
each side. Fill these later on with some freshly cut pieces of caps.
You don’t need to glue all the blocks together. The raised rings you put
on afterwards lock them in place. But securing the caps helps tie
things together as well as keep the caps from moving if you want to sit
on the wall. Use flexible concrete adhesive for this last step. Add
decorative rock to the bottom (inside) of your pit. Place in the fire
ring. Add some wood and start your dreamed of fire.